TeachLogic Neo Owner's Manual page 19

Remote Controller Functions
EJECT Press
can memorize a set of tracks for playback.
PROG
To Program a set of tracks:
1) Insert a disk into the CD player, press
2) Enter the folder and track number then press
For example: To program track 23 then 42 then 19, Press 0 and 1 for
folder, the LCD will display "01". Then press 2 and 3 for track number,
the LCD will display "23". Then press
will display "01 23:01". This is Folder number 1, track number 23, first
selection to play.
Then press 4 and 2 for track number, the LCD will display "42 :02" for
track number and selection number 2. Then press
tion, the LCD will display "01 42:02".
This is Folder number 1, track number 42, second selection to play.
Then press 1 and 9 for track number, the LCD will display "19 :03" for
track number and selection number 3. Then press
tion, the LCD will display "01 19:03".
This is Folder number 1, track number 19, third selection to play.
3) Repeat this process until all desired tracks have been memorized.
4) When all selections have been memorized press
A random selection of tracks will play. Press
RAN
"SHUFFLE".
REPEAT MODE. While playing a CD, press
REP
"REPEAT ALL". Repeat All will repeat all tracks one time. Press
the LCD will display "REPEAT 1". Repeat 1 will repeat all songs in that folder.
Press a third time, all repeats will be cancelled.
REP
Replacing Remote Battery
1. Pull battery clip
2. Insert battery
3. Replace clip
The battery for the remote is (model CR2025 3V).
Titan Neo COMPONENTS & OPERATION
to stop playing and eject the disc.
Owner's Manual
key one time.
PROG
to confirm selection.
to confirm selection, the LCD
and the LCD will display
RAN
once, the LCD will display
REP
to confirm selec-
to confirm selec-
again,
REP
19