TeachLogic Neo Owner's Manual page 18

Titan Neo
Titan Neo COMPONENTS & OPERATION
Playing CD-800S
• This player will accept 4.75" (12 cm) discs like CD, CD-R, CD-RW, MP3,
USB and SD / MMC memory cards, but will not play CD-ROM / CD-I / CDV,
or 3" (8 cm) discs.
• The CD player will accept MPEG-3 ( MP3 ) and WMA format files.
• Insert a disc into disc slot with the playback side down, playback starts
automatically. Track number and playing time will be displayed.
• To pause playback or start normal playback, press PLAY/PAUSE or press
on the remote controller.
• Press REV, F.WD, or
next track. CD player will continue playback while displaying selected track.
• To stop playback, press STOP/EJECT or press
controller.
• To eject CD press STOP/EJECT once to stop playback. Press again to eject
CD. Or press
• Press FB, FF or
fast forward until desired selection is located.
• Press LO, NOR, HI/PITCH or
low, normal and high playback pitch.
• Press FOLDER or
logue of tracks to be played.
Playing SD/MMC Card
• Insert SD Card or MMC Card into the insert hole of SD/MMC CARD in the
face plate. Push the card into the SD/MMC card slot. To remove the card,
please push the card to the bottom and then release. Please do not use force
to pull card out. Pulling the card will damage the card and/or machine.
• Press SD/USB/CD or SD/USB/CD on the remote controller. Select SD then
press PLAY/PAUSE or
Playing USB Drive
• Insert USB into the insert hole of USB in the face plate.
• Press SD/USB/CD or SD/USB/CD on the remote controller.
• Select USB then press PLAY/PAUSE or
USB Input will not accept audio from iPod, iPad or iPhone. You may connect an mp3 from the
device headphone jack to the Titan RCA inputs
18
on the remote controller, to select previous or
on remote controller.
on the remote controller, to activate fast back or
LOW NOR
on the remote controller, will select the next cata-
on the remote controller to play.
on the remote controller to adjust
HIGH
on the remote controller to play.
once on the remote