Table of Contents
Advertisement
Package Contents
Base station
Handset
Mains Adaptor
Telephone Line Cord
Rechargeable Batteries
(type AAA rechargeable)
Charger Unit
User's Guide
Please check the contents of the package carefully. If something is missing
or has become damaged in transit, you should NOT use the telephone.
In such a case you should return to the dealer with your sales receipt or contact the
Motorola's distributor directly. (For details, please refer to the Warranty section.)
Note:Retain the packaging of your appliance to prevent it from being damaged should
you ever need to return it.
Setting up the Base Station and Charger Unit
Place the base station and charger unit in an easily accessible location near to a mains
power socket. Make sure that the location is stable and flat and that the surface is
non-slip. Make sure that all cables can be routed so as to prevent people tripping over
them. Furthermore, avoid placing the base station and charger unit too close to other
electronic appliances such as microwaves, PCs or HiFis, for example.
Do not expose the base station and charger unit to direct sunlight or allow them to
become wet.They should not be set up in rooms which are subject to
condensation or corrosive steam or a high concentration of dust (e.g. cellars,
garages or conservatories).The room temperature must be between 0 c and 35 c.
Connecting the Base Station and Mains Adaptor
1. Thread the telephone cord and DC power cord
through the gap at the bottom between the base
and stand (as shown).
2. Insert the telephone line cord into the corresponding
socket on the base station.
3. Thread the two cords through the slot at the bottom
of the base.
4. Connect the mains power adaptor to the mains wall
socket and switch the power on.
5. Connect the telephone line cord to the telephone
socket.
The base station is now ready for use.
Installation
Single Pack
Twin Pack
1
1
1
2
1
2
1
1
2
4
0
1
1
1
5
Triple Pack
Quad Pack
1
1
3
4
3
4
1
1
6
8
2
3
1
1
Advertisement
Table of Contents
