Connecting The Charger Unit; Preparing The Handset(S) - Motorola ME7258 Series User Manual

Note: The base station does not have a power switch.
Only use the mains adaptor supplied with your phone.

Connecting the Charger Unit

Plug the mains adaptor into the wall socket .
The charger unit is now ready to use.

Preparing the Handset(s)

Inserting and Charging the Batteries
Open the battery compartment, by pushing downwards on the cover.
Insert the 2 x AAA (600 mAh / 1.2V) Ni-MH re-chargeable
batteries supplied, observing the correct polarity.
CAUTION : PLEASE DO NOT USE ALKALINE OR NON-
RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT
DAMAGE TO THE UNIT. AND VOID THE WARRANTY.
Non rechargeable batteries can explode and cause injuries
and heavy damage on your environment.
If the batteries are inserted incorrectly
the handset will not operate and there is
also a possibility that the handset
may become damaged.
Push the battery cover back on until you hear it click into place.
Place the handset in the base station/charger unit to charge the batteries.
A confirmation beep and the charging indicator confirm that the handset is charging.
Note: Before first use, the batteries should be allowed to charge for at least 16 hours,
without interruption. If possible, only take the handset out of the base station when
charging is complete. This will help to guarantee optimum operation.
Note: To ensure no interruptions during the initial charging period, you may prefer to
connect the telephone line cord after charging so as not to be disturbed by any
incoming calls.
LOW BATTERY WARNING
If the handset batteries are low and need charging you will hear a beep every 30
seconds and the icon will be displayed.
6