Table of Contents
Advertisement
Connecting RX-E200 and CDX-E200
1
Connect ‰ to ‰ using the RCA pin cable.
Insert the plugs into the jacks of the same colour.
2
Connect RX-E200 and CDX-E200 with the system control cable.
The other SYSTEM CONNECTOR of CDX-E200 is for connecting MDX-E100 or KX-E100.
3
Connect the AC power plug of CDX-E200 to AC OUTLET of RX-E200.
1
RCA pin cable
L
TAPE
R
L
MD
R
Adding KX-E100 and MDX-E100 to the above system
(For details, refer to the owner's manual supplied with the respective component.)
1
Connect Å and ı of RX-E200 to Å and ı of KX-E100.
2
Connect Ç and Î of RX-E200 to Ç and Î of MDX-E100.
3
Connect an external component to the AUX terminal of RX-E200.
4
Connect DIGITAL OPTICAL OUT of CDX-E200 to DIGITAL OPTICAL IN of MDX-E100.
Take off the covers of the optical fiber cable plug, the DIGITAL OPTICAL OUT jack, and the DIGITAL OPTICAL
IN jack before making digital connections. Be sure to replace the terminal's cover when the terminal on the rear panel
is not being used, in order to protect from dust.
5
AC OUTLET (CDX-E200)
Connect the AC power plug of MDX-E100 or KX-E100 (Except for the UK model).
Caution
• Never turn RX-E200 on until all connections between components have been completed.
• Never connect or disconnect the system control cable and/or power cord while the system components are turned on.
Connecting the system
ANALOG
DIGITAL
SYSTEM
OPTICAL
CONNECTOR
OUT
E
L
OUT
R
System control cable
75 Ω UNBAL
FM ANT
GND
AM ANT
B
A
E
R
L
CD
OUT
IN
IN
AUX
6 Ω MIN./SPEAKER
D
C
SPEAKERS
GETTING STARTED
<CDX-E200>
3
To RX-E200
<RX-E200>
2
SUBWOOFER
SYSTEM
CONNECTOR
OUT
To wall outlet
5
Hide quick links:
Advertisement
Table of Contents
