Chevrolet Traverse Owner Manual - 2013 - crc - 8/20/12
License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
on page 2 8.
2. Push the left end of the lamp
assembly toward the right.
3. Turn the lamp assembly down to
remove it from the liftgate.
4. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
5. Pull the bulb (2) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
Black plate (27,1)
Vehicle Care
7. Turn the lamp assembly into the
liftgate engaging the clip side
first.
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Replacement Bulbs
Bulb
Exterior Lamp
Number
License Plate Lamp
194 LL
Rear Turn
7443 NA
Signal Lamp
Taillamp/Stop Lamp
7444 LL
For replacement bulbs not listed
here, contact your dealer.
10-27