Ultrasonic Parking Assist; Power Outlets - Chevrolet Traverse 2013 Owner's Manual

Hide thumbs Also See for Traverse 2013:
Table of Contents

Advertisement

Chevrolet Traverse Owner Manual - 2013 - crc - 8/20/12
1-22
In Brief
: Press to set or reset certain
functions and to turn off or
acknowledge messages on the DIC.
: Press to customize the feature
settings on your vehicle. See
Vehicle Personalization (With DIC
Buttons) on page 5 41 for more
information.
: Press to display the oil life,
park assist on vehicles with this
feature, units, tire pressure readings
on vehicles with this feature, and
compass calibration and zone
setting on vehicles with this feature.
: Press this button to display
the odometer, trip odometers, fuel
range, average economy, timer, fuel
used, and average speed.
Some vehicles do not have the
buttons shown, however some of
the menus can be viewed by using
the trip odometer reset stem.
See Driver Information Center (DIC)
(Without DIC Buttons) on page 5 28
or Driver Information Center (DIC)
(With DIC Buttons) on page 5 23.

Ultrasonic Parking Assist

If available, this system uses
sensors on the rear bumper to
assist with parking and avoiding
objects while in R (Reverse).
It operates at speeds less than
8 km/h (5 mph). URPA uses audible
beeps to provide distance and
system information.
Keep the sensors on the vehicle's
rear bumper clean to ensure proper
operation.
See Ultrasonic Parking Assist on
page 9 31.
Black plate (22,1)

Power Outlets

The vehicle has 12-volt accessory
power outlets which can be used to
plug in electrical equipment, such as
a cell phone or MP3 player.
The power outlets are located:
On the instrument panel below
the climate controls.
Inside the center floor console.
At the rear of the center floor
console.
In the rear cargo area.
To use the outlets, remove the
cover.
See Power Outlets on page 5 8.

Advertisement

Table of Contents
loading

Table of Contents