Wiper Blade Replacement - Chevrolet Traverse 2013 Owner's Manual

Hide thumbs Also See for Traverse 2013:
Table of Contents

Advertisement

Chevrolet Traverse Owner Manual - 2013 - crc - 8/20/12
10-24
Vehicle Care
Park on a fairly steep hill, with the
vehicle facing downhill. Keeping
your foot on the regular brake, set
the parking brake.
To check the parking brake's
holding ability: With the engine
running and the transmission in
N (Neutral), slowly remove foot
pressure from the regular brake
pedal. Do this until the vehicle is
held by the parking brake only.
To check the P (Park)
mechanism's holding ability:
With the engine running, shift to
P (Park). Then release the
parking brake followed by the
regular brake.
Contact your dealer if service is
required.

Wiper Blade Replacement

Front Wiper Blade
Windshield wiper blades should be
inspected for wear or cracking. See
Maintenance Schedule on
page 11 3.
Replacement blades come in
different types and are removed in
different ways. For the proper type
and size, see Maintenance
Replacement Parts on page 11 13.
To replace the wiper blade
assembly:
1. Pull the windshield wiper
assembly away from the
windshield.
Black plate (24,1)
2. Squeeze the tabs on each side
of the wiper blade assembly and
slide the assembly off the end of
the wiper arm.
3. Install the new blade onto the
arm connector and make sure
the tabs are fully set in the
locked position.

Advertisement

Table of Contents
loading

Table of Contents