Headlamp High/Low-Beam; Flash-To-Pass; Daytime Running Lamps; Headlamp System - Chevrolet Traverse 2013 Owner's Manual

Chevrolet Traverse Owner Manual - 2013 - crc - 8/20/12
6-2 Lighting
Taillamps
License Plate Lamps
Instrument Panel Lights
(Parking Lamps): Turns the
parking lamps on together with the
following:
Taillamps
License Plate Lamps
Instrument Panel Lights
(Headlamps): Turns the
headlamps on together with the
following lamps. A warning chime
sounds if the driver door is opened
when the ignition switch is off and
the headlamps are on.
Parking Lamps
Taillamps
License Plate Lamps
Instrument Panel Lights
Headlamp High/
Low-Beam Changer

(Headlamp High/Low-Beam

Changer): Push the turn signal
lever away from you to turn the high
beams on.
Pull the lever toward you to return to
low beams.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.

Flash-to-Pass

This feature is used to signal to the
vehicle ahead that you want
to pass.
Black plate (2,1)
If the headlamps are off or in the
low-beam position, pull the turn
signal lever toward you to
momentarily switch to high beams.
Release the lever to turn the
high-beam headlamps off.

Daytime Running Lamps

(DRL)/Automatic

Headlamp System

Daytime Running Lamps (DRL) can
make it easier for others to see the
front of your vehicle during the day.
Fully functional daytime running
lamps are required on all vehicles
first sold in Canada.
The DRL system makes the
low-beam headlamps come on at a
reduced brightness when the
following conditions are met:
The ignition is in the ON/RUN
position.
The exterior lamp control is
in AUTO.
The engine is running.