Temperature Regulation; Frostmatic Function; High Temperature Alarm; Coolmatic Function - AEG S83430CTX2 User Manual

8 www.aeg.com
2. Press OK to confirm.
The fridge OFF indicator is shown.

4.6 Temperature regulation

Set temperature of the fridge and of the
freezer by pressing the temperature
regulators.
Default temperatures:
• +5°C for the fridge
• -18°C for the freezer
The temperature indicators show the set
temperature.
The appliance activates a function mode
that permit to optimize the food
preservation and energy consumption.
This guarantees the maximum silentness
during the performance of the appliance.

4.7 High temperature alarm

An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure or door is open)
is indicated by:
• flashing the alarm and freezer
temperature indicators;
• sounding of buzzer.
To reset the alarm press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a
few seconds. Then show again the set
temperature.
The alarm indicator continues to flash
until the normal conditions are restored.

4.8 COOLMATIC function

If you need to insert a large amount of
warm food, for example after doing
grocery shopping, we suggest activating
the COOLMATIC function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
After a power failure the set
temperature remains stored.
The set temperature will be
reached within 24 hours.
When the alarm has
returned the alarm indicator
goes off.
1. Press Mode until the corresponding
icon appears.
The COOLMATIC indicator flashes.
2. Press OK to confirm.
The COOLMATIC indicator is shown.
The COOLMATIC function
shuts off automatically after
52 hours. To switch off the
function before its automatic
end, repeat the steps until
the COOLMATIC indicator
goes off.

4.9 FROSTMATIC function

The FROSTMATIC function accelerates
the freezing of fresh food and, at the
same time, protects foodstuffs already
stored from undesirable warming.
1. Press Mode button until the
corresponding icon appears.
The FROSTMATIC indicator flashes.
2. Press OK button to confirm.
The FROSTMATIC indicator is shown.
The FROSTMATIC function
shuts off automatically after
52 hours. To switch off the
function before its automatic
end, repeat the steps until
the FROSTMATIC indicator
goes off.
4.10 DYNAMICAIR function
1. Press Mode until the corresponding
icon appears.
The DYNAMICAIR indicator flashes.
2. Press OK to confirm.
The DYNAMICAIR indicator is shown.
The activation of the
DYNAMICAIR function
increases energy
consumption. If the function
is activated automatically,
the DYNAMICAIR indicator
is not shown (refer to "Daily
use").
To switch off the function, repeat the
steps until the DYNAMICAIR indicator
goes off.