AEG S83430CTX2 User Manual page 22

22 www.aeg.com
1
15. Reposition the top door cap and
insert all plugs.
2
16. Unscrew the lower door stopper and
then install it on the opposite side
17. Unscrew the handles then handle
brackets.
2
2
1
h1 h2
18. Attach the handle brackets then
handles on the opposite side.
h4 h5
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
Do a final check to make
sure that:
• All screws are tightened.
• The magnetic seal
adheres to the cabinet.
• The door opens and
closes correctly.
If the ambient temperature
is cold (i.e. in Winter), the
gasket may not fit perfectly
to the cabinet. In that case,
wait for the natural fitting of
the gasket. In case you do
not want to carry out the
above mentioned
operations, contact the
nearest After Sales Service
Force. The After Sales
Service specialist will carry
out the reversibility of the
doors at your cost.
h3
h6