Cleaning The Air Filter Element - Yamaha Grizzly 80 YFM80GW Owner's Manual

1
2
3
4
1
5
6
1. Final gear oil drain bolt
7
4. Install the drain bolt, and then tighten it to the
specified torque.
8
Tightening torque:
9
Final gear oil drain bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
10
5. Add the specified amount of the recommend-
11
ed final gear oil, and then check the oil level.
Recommended final gear oil:
See page 10-1.
Oil quantity:
0.12 L (0.13 US qt) (0.11 Imp.qt)
ECB00420
CAUTION:
Be sure no foreign material enters the final
gear case.
6. Install and tighten the oil filler cap.
7. Check the final gear case for oil leakage. If oil
is leaking, check for the cause.
EBU27170

Cleaning the air filter element

The air filter element should be cleaned at the in-
tervals specified in the periodic maintenance and
lubrication chart. Clean the air filter element more
frequently if you are riding in unusually wet or dusty
areas.
NOTE:
There is a check hose at the bottom of the air filter
case. If dust or water collects in this hose, empty
the hose and clean the air filter element and air fil-
8-14