Yamaha Grizzly 80 YFM80GW Owner's Manual page 110

stored as follows.
1. Disconnect the negative lead first and then the
1
positive lead.
2
3
4
5
2
6
7
1. Battery
8
2. Negative lead
3. Positive lead
9
2. Remove the battery, fully charge it, and then
10
place it in a cool, dry place.
ECB00600
11
CAUTION:
Do not leave or store the battery on its side.
3. If the battery will be stored for more than two
months, check the specific gravity of the elec-
trolyte at least once a month and fully charge
1
3
8-34
the battery whenever necessary.
To install the battery
NOTE:
Be sure the battery is fully charged.
1. Install the battery.
2. Connect the positive lead first, and then con-
nect the negative lead.
3. Make sure that the breather hose is properly
routed, in good condition, and not obstructed.
2
1. Battery
2. Negative lead
3. Positive lead
1
3