Table of Contents
Advertisement
NetWare 4.1 Remote Printer Mode
In order to use the NetWare 4.1 remote printer mode, it is
necessary to set up the file server and the Fast EtherNet.
See other relevant topics in this chapter for:
•
printing on the NetWare 4.1 print server mode through
via NDS network;
•
printing on the NetWare 4.1 print server mode via the
bindery network;
•
using NetWare 3.1.
The following description uses NetWare 4.1 as an example. Some
of the on-screen indications or options may vary according to
the OS version and system configuration.
In this example, the Fast EtherNet is connected to the NetWare
NDS tree "ODCSOFT", the admin user context "ENG7", the
context "SOFT22.ENG7" for creating a print server, and the file
server "SOFT22NW4".
Starting PCONSOLE through NDS
For the purpose of this example we will use F: as the network
drive name for logging in to the NetWare server.
User Manual
1
On the client, go to the context where admin exists ("ENG7"
in this example), using the CX command. After entering
Login, input your password.
2
Log in to the file server ("SOFT22-NW4" in this example)
by using the admin authority. After entering log-in, input
your password.
3
Using the CX command, go to the directory where you
generate the print server, printer and print queue ("SOFT22"
in this example).
4
Start PCONSOLE.
[Available Options] is displayed.
89
Advertisement
Table of Contents
