5
Follow the instructions on the screen to configure the Fast
EtherNet.
For creating NetWare queues and so on, it is
necessary to add NetWare Client32 or IntranetWare
Client to the PC.
132
6
Check the setting details. If the settings are correct, click [Run].
The new settings will be transmitted to the Fast EtherNet.
At this point, the Fast EtherNet is still operating with
the previous settings.
7
Click [Finish] to make the new settings take effect.
You may need to switch the printer, depending on the
model, off and then back on again.
Fast Ethernet