Anti-Theft Protection - Skoda Bolero Owner's Manual

WARNING
Please concentrate fully at all times on your driving! As the driver you are fully
responsible for road safety. Only use the functions of the radio in such a way
that you are always in full control of your vehicle in all traffic situations!
Caution
•
Inserting a second CD while a CD is being ejected can destroy the CD drive in the
unit. Please note that the CD ejection lasts a few seconds after pressing the Eject
key . During this time the lock in front of the CD case is open. It is essential
 / 
that you wait until the CD has been fully ejected before you try to insert a new CD.
•
Press the buttons and the keys of the unit gently in order to avoid damaging
them. Gentle pressure on the appropriate key is sufficient to operate the unit.
Please note that the control buttons have predetermined breaking points, in order
to reduce the risk of injury.
•
Do not use any pointed or sharp-edged objects to operate the touch-screen.
Slight finger pressure sufficient to operate the equipment. A display on the screen,
which cannot be called up by pressing the button, is therefore not available at that
time.
Cleaning the screen
Caution
•
Do not use solvent such as turpentine or petrol as they will attack the screen
surface.
•
Treat the screen with great care, because dents and scratches can occur
through finger pressure or contact with sharp objects.
Note
The screen can be cleaned with a soft cloth and finger marks can be wiped away
with pure alcohol.

Anti-theft protection

Anti-theft coding
Your radio is equipped with a convenience coding. When the radio is switched on for
the first time, the security code is stored in the radio and in the vehicle.
After disconnecting and reconnecting the battery, first switch on the ignition and
then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered.
In this case, please do not hesitate to contact an authorised Škoda Service Partner
or a Škoda importer.
As the unit only functions after entering the safety code, this practically excludes its
use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cluster. This automatically decodes the radio
(convenience operation). Manual input of the code is normally not necessary.
Enter code
If a keypad appears after switching on with the command to enter the code, the unit
can be unlocked by entering the correct four-digit code number.
– Press a digit from to on the digit block displayed on the screen. The digit
0 9
is accepted in the entry line.
– After the four-digit code number has been entered, the group of digits will turn
grey (inactive) and no further digits can be accepted in the entry line.
– Press on the touch-screen to erase the digits in the entry line from right to

left and thereby correct your input, if necessary.
– If the correct code number is displayed in the entry line, press
Code number
The code number can only be called up "online" via the Škoda system, as this guar-
antees even more effective anti-theft protection. Please contact your authorized
Škoda Service Partner, if necessary.
General information 3
OK .