Telephone Operation - Skoda Bolero Owner's Manual

Scan/Mix/Repeat including subfolders
according to the sequence on the played medium, which are stored in the folders
and subfolders.
– the input sensitivity of the AUX-IN socket for adjusting the play
AUX input level
function volume of a connected external audio source can be adapted to other
audio sources in three levels. Press the function key
desired input sensitivity in the pop-up window that opens. If a multimedia socket
MEDIA-IN is additionally installed, this setting also applies to audio sources which
are connected to the multimedia socket.
System Setups
Open the Setup System menu by pressing the range selector key
function key .
System
Change the system language manually
– Press on the function key
Language
up window that opens. The system language is normally preset to the set
language in the instrument cluster "Automatic". If desired, another language
can be selected for the radio as described.
Reset the factory settings on the unit
– Press on the function key Factory settings
– Confirm the following safety interrogation, the unit will be reset in the as-deliv-
ered condition and all the stored data will be erased.
Rear lighting of the control buttons
– Press the function key
Illumination
– You can switch the rear lighting of the control buttons
2 or off 1 , when the ignition is switched on.
Display of the setting for the Climatronic unit
– Press the function key Climate displays
– You can switch the display of the Climatronic values on or off.
- plays all MP3 data one after the other
AUX input level and select the
SETUP
and select the desired language in the pop-
.
.
A and A on the unit on
1 2
.
Telephone set-ups
Call up the Setup Telephone menu by pressing the range selector key
the function key Telephone
Updating telephone book in the unit
– Press on the function key
unit, the telephone book of the mobile phone or the SIM card entered since the
last connection. This procedure can take a few minutes.
– Confirm the following safety interrogation. The "old" data in the telephone book
are still available in the unit during the update.
– For more information, see the applicable vehicle operating instructions.
and the
Delete call lists
– Press on the function key
– If you confirm the following safety prompt by pressing
phone numbers and the list of missed calls in the unit will be deleted.
Modifying assigned shortcut keys
– Press the function key
– To change the assignment of a particular shortcut key, select the respective
shortcut key by pressing the key in the following menu.
– Change the entry as described.

Telephone operation

Main menu TELEPHONE
Connect your mobile phone with the mobile phone program according to the
instruction manual applicable to your vehicle.
– Press the range selector key
After the connection process, it will take a few minutes until the telephone book
data of the connected mobile phone is available in the radio.
.
to update all entries in the
Update telephone book
.
Delete call lists
Delete
to modify the assigned shortcut keys.
Speed dial
to open the Telephone main menu.
PHONE
Basic setting 13
SETUP and
, the list of dialled