Viking 15”W. Undercounter/Freestanding Ice Machine Use & Installation Manual page 5

Selecting and Preparing the Wood Frame - DFIM Models
FOR A 3-1/2" TOE KICK
(COVERS THE ENTIRE DOOR FRONT - LEFT HINGE)
1/4" x 3/8" deep hinge screw clearance hole. Locate and drill using
door hinge hole after the door has been aligned to the unit and when
the wood is positioned on door.
Min. 5/8" (1.7 cm)
Max. 3/4" (1.9 cm)
14-3/4" (37.5 cm)
30-5/16"
(77.0 cm)
TYP
Pre-drilled pilot holes -
Mounting Surface
(non-face) side
1/4" x 3/8" deep hinge screw clearance hole. Locate and drill using
door hinge hole after the door has been aligned to the unit and when
the wood is positioned on door.
Mounting Surface
(non-face) side
8-1/8" (20.7 cm)
TYP
5" (12.7 cm)
TYP
23/32"
14-7/16"
(1.8 cm)
(1.12 cm)
TYP
TYP
5"
(12.7 cm)
TYP
TOP
23-27/32"
OF
(60.6 cm)
DOOR
TYP
13/16"
(2.1 cm)
TYP
10 places
Mounting Surface
(non-face) side
8
Selecting and Preparing the Wood Frame - DFIM Models
FOR 3-1/2" TOE KICK
(COVERS THE ENTIRE DOOR FRONT - RIGHT HINGE)
1/4" x 3/8" deep hinge screw clearance hole. Locate and drill
using door hinge hole after the door has been aligned to the
unit and when the wood is positioned on door.
Min. 5/8" (1.7 cm)
Max. 3/4" (1.9 cm)
14-3/4" (37.5 cm)
30-5/16"
(77.0 cm)
TYP
Pre-drilled pilot holes -
Mounting Surface
(non-face) side
1/4" x 3/8" deep hinge screw clearance hole. Locate and
drill using door hinge hole after the door has been aligned
to the unit and when the wood is positioned on door.
Mounting Surface
(non-face) side
8-1/8" (20.7 cm)
TYP
5" (12.7 cm)
TYP
23/32"
14-7/16"
(1.8 cm)
(1.12 cm)
TYP
TYP
5"
(12.7 cm)
TYP
TOP
OF
DOOR
23-27/32"
(60.6 cm)
TYP
13/16"
(2.1 cm)
TYP
10 places
Mounting Surface
(non-face) side
9