Working With Supervisor-Level Passwords - Toshiba Satellite 110 Series User Manual

Working with Supervisor-Level Passwords

When a supervisor-level password is set, you must enter the super-
visor password to make changes in MaxTime, Hardware Setup or
TSETUP. This section describes how to create and use a supervi-
sor-level password.
Creating a Supervisor-Level Password
To create a supervisor-level password, follow these steps:
1 If you're currently in Windows 95, click Start, then click
Shut Down.
2 Click the button next to Restart the computer in MS-DOS
mode and click Yes.
Windows 95 shuts down the computer, then restarts it in
MS-DOS mode and displays a system prompt.
3 Type
c:\dos\svpw
The Supervisor Password program asks if you want to register
(create) a password.
4 Press Y.
The Supervisor Password program asks you to enter a
password.
5 Type in a password and press Enter.
A password can be any combination of up to 10 letters and
numbers. To protect from spying eyes, the Supervisor Pass-
word program displays an asterisk (*) for each character you
type.
The Supervisor Password program indicates that your pass-
word is registered.
6 Type in the password again to verify it and press
7 Type
exit
Part I: Getting To Know Your Computer
Keeping Your Files Safe
Using a Password
and press .
Enter
to return to Windows 95.
193
.
Enter