Connector
Connect to
4
Red wire
The +12V power terminal
which is live in the accessory
(ACC) position of the ignition
switch. If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Ensure that
black ground (earth) lead is
connected to a metal surface
of the car first.
5
Green and
Left speaker (Rear)
green/black
wires
6
White and
Left speaker (Front)
white/black
wires
7
Gray and
Right speaker (Front)
gray/black
wires
8
Purple and
Right speaker (Rear)
purple/
black
wires
2
Connect the other end of the supplied
standard connector to the car audio
system.
Caution
•
To avoid any accident, the driver must not watch video
while driving. This unit is designed to not allow watching
moving video while driving. Park your car in a safe place
and engage the parking brake before watching moving
video.
Note
•
The video blocking system under parking brake not
engaged only control the display of this unit, and will
not affect the video output through the rear RCA
video output.
•
If watch moving video from disc or AV-IN source but
parking brake is not properly connected, the video
signal will be blocked by the system, and the below
display will be shown on TFT:
22
21
20
8
1
5
7
6
2
3
4
Connector/Object
1
Pink wire
2
2.5m extension
wire (not included)
3
Brake switch
4
Ground
9 0! " $
§ %
&
/
Connect to/with
Extension wire
Parking brake (-)
EN
18
19
12