Controlling Tone-Based Services - Kenwood DDX630BT Instruction Manual

7 If there are more than one phone numbers
assigned under the registered name
5 Say the key word registered for the
category
When a beep is heard, say the key word within
2 seconds.
6 Make a call
7 If there are more than one phone numbers
registered under the same name, go to step 7.
7 Select a Phone number category
Selects the Phone number category.
8 Make a call
⁄
• A message is displayed if the voice is not recognized.
Read the message for the further operation.

Controlling Tone-based Services

Uses tone base service using DTMF (Dual Tone
Multi Frequency).
1 Display the Talking screen
See <Calling by Entering a Phone Number>
(page 43).
2 Display the DTMF input screen
3 You can send tones during a call
English 45