Panel Color Coordinate; [Color]; 2 Ddx630Bt - Kenwood DDX630BT Instruction Manual

Setup Menu

Panel Color Coordinate

Sets the button illumination color.
1 Display the Color screen
Touch [ ] > [
(page 55)
2 Display the Panel Color Coordinate screen
[Initialize] Initialization resets the settings
made using the Panel Color to the default
settings made at the factory.
[Panel Color Scan] When set to "ON", the
illumination color of the buttons changes one
after another.
⁄
• When touching [SET] or [Initialize], make sure [Panel
Color Scan] is set to "OFF".
3 Select a color
1 1 1
1 Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([P1] – [P3]).
62 DDX630BT
] > [Display] >

[Color].

To register your original color
1 Start the RGB coordinate
2 Adjust each color value
1 1 1
1 Selects a preset number to register.
[Red Value] Adjusts the Red value.
[Green Value] Adjusts the Green value.
[Blue Value] Adjusts the Blue value.
3 Select a Preset number to register
2 sec.
Adjusted color is registered to the selected
Preset button.
4 Complete the color coordination