Using Your Steam Mop - Shark S3901UKL Owner's Manual

Using Your Steam Mop

IMPORTANT: Make sure you do not
use the mop without attaching a
microfibre cleaning pad and adding
water to the tank first. When you are
using the mop for the first time, it
might take longer than the normal
30 seconds to start steaming.
NOTE: Sweep or vacuum your floors
prior to cleaning with your Steam
Mop.
S3901UKL_11_IB_E_111020_1.indd 5
fig. 7
1
Pull and twist the quick release cord
holder to unwrap the power cord
completely. Plug into a 220-240-volt
electrical outlet. (fig. 7)
2
The ON/STANDBY button will flash
blue. If the light does not turn on,
reference the troubleshooting section
on page 16. (fig. 8)
fig. 8
www.lakeland.co.uk
11-10-20 11:19 AM
5