Using Your Carpet Glider - Shark S3901UKL Owner's Manual

Using Your Steam Mop - cont'd
fig. 12
5 When one side of the microfibre
cleaning pad gets dirty, just flip the
mop and you can quickly start using
the other side. (fig. 12)

Using Your Carpet Glider

THE CARPET GLIDER
1 The Carpet Glider can be used with
the All-Purpose Head to lightly steam
your carpet and area rugs. Just
place the mop head with microfibre
cleaning pad attached into the glider.
The recommended steam setting is
SCRUB when using the Carpet Glider.
(fig. 13)
8 www.lakeland.co.uk
S3901UKL_11_IB_E_111020_1.indd 8
6
fig. 13
2
When the water tank is empty, the
Steam Mop will stop producing
steam. You can refill the water tank
at any time as long as the mop is
unplugged from the outlet. Follow
the instructions from page 4. This
applies to switching the mop heads
or microfibre cleaning pad as well.
NOTE: Please wait 2-3 minutes for
the Steam Mop to cool off before
switching the mop head or the
microfibre cleaning pad. Never
leave the Steam Mop with a damp/
wet microfibre cleaning pad on
any floor.
The Steam Mop will not clean your
carpeting or area rugs. However, it is
great for grooming and freshening.
Move the Steam Mop back and forth
across a section of the carpet.
(fig. 14)
fig. 14
11-10-20 11:19 AM