KYMCO UXV500 4x4 Owner's Manual page 73

Maintenance And Lubrication
Cooling System Inspection
1. Remove the under-hood hook& pu
bolts
2. Check the coolant level in the
coolant reservoir when the engine is
cold as the coolant level will vary with
engine temperature. The coolant level
should be between the maximum and
minimum marks.
3. If the level is low, remove the coolant
reservoir cap, and then add coolant or
distilled water to raise it to the
specified level.
CAUTION:
Hard water or salt water is harmful to the
engine. You may use distilled water if rou
can not get soft water.
NOTE:
1. If water is added, have a KYMCO dealer
check the antifreeze content of the coolant
as soon as possible.
2. The radiator fan operation is completely
automatic. It is switched on or off according
to the coolant temperature in the radiator.
FULL
LOW
67