KYMCO UXV500 4x4 Owner's Manual page 56

How to operate
Start the engine
Do not run the starting attempt. The starter motor may
overheat causing severe starter motor damage. Allow
15 seconds between starting attempts to allow the
starter motor to cool.
Braking/Stopping
Always allow plenty of room and time to stop smoothly. Sometimes quick stops
are inevitable' so always be prepared.Whether you're stopping quickly' do
this:
1.Release the accelerator;then press the foot brake pedal to apply the brake.
2.If the wheels lock,release them for a second;then apply them again .On
surfaces such as ice,mud or loose gravel' pump the brake pedal rapidly.
3.Never ride the brake .Even maintaining minimal pressure on the brake pedal
will cause the brake pads drag on the disc and may overheat the brake fluid.
CAUTION
!
50