Reiner 780 Operating Instructions Manual page 36

Display
Error 11 Numberer 1 :
Error 12 Numberer 2 :
Skip is larger or even 10
but numberer of stamp
picture is single-digit
• Chip card inserted
Error 15
• Chip card is not valid
Error 16
Not a REINER chip card
Error 17
Key number of chip card
differs from key number
stored in the device
Error 18
Data on chip card exceed
the maximum range of
imprint
Error 19
Number of stamp picture
on chip card doesn't exist
36
Possible reason
incorrectly
Recommendation
delete error indication by
pressing [ set ] , following
set 'Skip n1' or 'Skip n2'
to a value less than 10
(see page 23 / 24)
Insert a valid REINER
chip card correctly
Use REINER chip card
Correct key no. on chip card
or change the setting of
the device
Enter another stamp picture
to chip card
Enter a valid number of
stamp picture to chip card