Reiner 780 Operating Instructions Manual page 32

b) Setting Switch line = 1 (standard setting)
i
Note
Push a document against depth stop and trigger
the stamping operation.
Line 1 will be printed.
The display switches to TEXT LinE 2
Move the document against the stop again and trigger
another stamping
Line 2 will be printed
The Display returns to the selected stamp picture and the
depth stop returns to print line 1 position.
i
Note
c) Setting Switch line = 2
i
Note
32
With this setting, after every stamping the machine
automatically switches to the next print line, and at
the same time automatically changes line.
Using the [ line ] key, it is also possible to switch
manually to print line 2. In this case, the feed unit
does not change the position of the depth stop.
After stamping the machine automatically switches
to print line 1
With this setting, after every stamping the machine
automatically switches to the next print line.
There is no automatically change of the position
of the depth stop