Chapter 3
3.2.1
Association on Windows Vista
Procedure
Proceed as follows:
1
On the taskbar, click the Start button, and then click Connect to.
2
A list of the available wireless networks appears.
If your wireless access point does not broadcast its network name (SSID), it will not be
displayed in this list. Click Set up a connection or network and configure your wireless client
manually. For more information, consult the Windows help.
Double-click your wireless access point.
3
If your wireless network is:
Secured, you will be prompted to enter your network key. Enter your network key and click Connect.
Not secured, you will get a warning that you are trying to connect to an unsecured network. Click
Connect Anyway.
Your Wireless USB Adaptor now connects to your wireless access point.
4
At the end of the procedure, click Save this network. The wizard automatically selects Start this
connection automatically.
5
Click Close.
6
Double-click the location that best suits to your location.
12
E-DOC-CTC-20080318-0006 v1.0