Rear Panel - Planet Networking & Communication ICA-HM230 User Manual

2.2.2 Rear Panel

DC Power Jack
Audio Output Jack
Audio Output Jack
DC Power Jack
LAN Socket
Factory Default Reset
Audio-out Jack allows this device to output audio or alerting sound.
The input power is 12VDC.
Only use the power adapter supplied with Internet camera.
NOTE
Otherwise, the product may be damaged.
When this device is powered by PoE, you don't have to
connect the power adapter to this connector.
The LAN socket is a RJ-45 connector for connections to 10Base-T
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built
N-Way protocol can detect or negotiate the transmission speed of the
network automatically. Please use Category 5 "straight through" cable
to connect the Internet camera to a 100Mbps Fast Ethernet network
switch or hub. The LAN socket is compliant with IEEE802.3af standard
PoE interface.
NOTE If you need to connect the device to PC or notebook directly,
you should use cross over cable instead.
This button is hidden in the pinhole. Please refer to the Appendix A in
manual for more information.
10
Factory Default Reset
LAN Socket