polarity marks"+"and "-" on the batteries match the diagram as shown within the battery
compartment.
20
3.
Replace the battery cover.
20
Remote Control Setup
Remote Control Setup
To prevent battery leakage which may result in bodily injury or damage to the remote:
1.
Install all batteries correctly, and as marked on the remote control.
1.
Open the cover at the back of the remote control.
1.
Open the cover at the back of the remote control.
2.
Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries
2.
Insert two 1.5V AAA batteries, ensuring the polarities (+/-) of the batteries are correctly
2.
Insert two 1.5V AAA batteries, ensuring the polarities (+/-) of the batteries are correctly
when the remote is not used for a long time.
aligned and the batteries are properly pushed into place so they can power the remote
aligned and the batteries are properly pushed into place so they can power the remote
3.
It is recommended that you use ALKALINE type batteries.
unit on.
unit on.
3.
3.
Replace the battery cover.
Replace the battery cover.
Precautions when using batteries
Precautions when using batteries
•
Do not use old and new batteries together.
•
Do not use old and new batteries together.
•
Do not use different types of batteries (for example, Manganese and Alkaline batteries)
•
Do not use different types of batteries (for example, Manganese and Alkaline batteries)
together.
together.
•
Note that there are chargeable the non-chargeable batteries. Do not attempt to charge
•
Note that there are chargeable the non-chargeable batteries. Do not attempt to charge
non-chargeable batteries.
non-chargeable batteries.
•
Remove the batteries from the remote control unit if you do not intend to use the unit
•
Remove the batteries from the remote control unit if you do not intend to use the unit
for a long time.
for a long time.
•
When disposing used batteries, follow any guidelines for recycling and disposal of
•
When disposing used batteries, follow any guidelines for recycling and disposal of
batteries that apply in your local area.
batteries that apply in your local area.
Using the Remote Control
Using the Remote Control
The remote control should be operated within 20 feet (5m) and 30° to the left or the right of
The remote control should be operated within 20 feet (5m) and 30° to the left or the right of
the IR receiver at the front of the TV.
the IR receiver at the front of the TV.