JVC KD-BT11 Instructions Manual page 25

Indications Item
(
EXT INPUT * 8, * 9 • CHANGER
External input • EXT INPUT
TAG DISPLAY • TAG ON
Tag display • TAG OFF
AMP GAIN • LOW POWER
Amplifier gain
control • HIGH POWER
IF BAND • AUTO
Intermediate
frequency band • WIDE
AREA • AREA US
Tuner channel
interval • AREA EU
• AREA SA
*
8 Displayed only when one of the following sources is selected—FM, AM, CD, BLUETOOTH, AUX IN.
*
9 Not required for HD Radio broadcast/SIRIUS/XM tuners.
Setting, [reference page]
: Initial)
: To connect a JVC CD changer, [16], or an Apple iPod, [19].
: To connect portable audio player to the CD changer jack, [20].
: Shows the Tag information while playing MP3/WMA tracks.
: Cancels.
: VOLUME 00 – VOLUME 30. (Select this if the maximum power of the
speaker is less than 50 W to avoid damaging the speaker.)
: VOLUME 00 – VOLUME 50.
: Increases the tuner selectivity to reduce interference noises between
adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
: When using in North/Central/South America. AM/FM intervals are set
to 10 kHz/200 kHz.
: When using in any other areas. AM/FM intervals are set to 9 kHz/
50 kHz (100 kHz during auto search).
: When using in South American countries where FM interval is
100 kHz. AM interval is set to 10 kHz.
SETTINGS 25