40
8.4
FACING KIT INSTALLATION/REMOVAL
THE COMPONENTS IN THIS KIT ARE HEAVY, USE CARE WHEN LIFTING AND ENSURE THEY ARE
THIS FRONT FACING DOES NOT REPLACE THE MAIN GLASS DOOR. DO NOT OPERATE WITHOUT
THE FRONT FACING CAN SIT FLUSH WITH A COUNTER, FLOOR, OR HEARTH.
8.4.1 FACING KIT
Open the bottom inset to
C.
access the control panel.
8.4.2 CONTEMPORARY FACING KIT
(If appliance is equipped with either of these fronts, cement board is
required.)
REMOVAL:
Lift the facing up and off the screws.
A.
INSTALLATION:
Lift the facing and slide the hooks over the top of the spacers
B.
and then let it slide down into position.
W415-1004 / B / 08.10.12
WARNING
!
FIRMLY SECURED ONCE INSTALLED.
THE MAIN GLASS DOOR INSTALLED.
Remove the keystone to access the turn
A.
button.
Remove the front by turning the turn
B.
button 1/4 turn. Pivot the top of the
facing away from the appliance, and
lift it up and away from the appliance.
4
6
5
5