Makita AG125 Instruction Manual page 4

Only those involved in the work should be in the
vicinity. Children especially must be kept away at
all times.
There may be local regulations concerning noise
which must be complied with by keeping noise
levels within prescribed limits. In certain cases,
shutters should be used to contain noise.
.Securing the trigger in the ON position is also
very dangerous. Never attempt to fasten the
trigger.
Do not operate a tool if any portion of the tool
operating controls is inoperable, disconnected,
altered, or not working properly.
Operate the tool within the specified air pressure
of 4.5
-
8 . 5 kgf/cmzG (65
-
120 PSIG) for safety
and longer tool life. Do not exceed the recom-
mended max. operating pressure of 8.5
kgf/cmzG (120 PSIG). The tool should not be
connected to a source whose pressure potentially
exceeds 14.0 kgf/cm'G (200 PSIG).
Shutter
I
8 5 kgf/cm2 G 8 5 kgf/cmzG
(120 PSIG) ( 120 PSIG)
4