Makita AG125 Instruction Manual page 15

Maintenance of compressor, air set and air hose
After operation, always drain the compressor tank and the air filter. If moisture is allowed to enter the
tool, it may result in poor performance and possible tool failure.
r -
Drain cock
Check regularly to see if there is sufficient pneu-
matic oil in the oiler of the air set. Failure to main-
tain sufficient lubrication will cause O-rings to
wear quickly.
Keep the air hose away from heat (over 6OoC, over
14OoF), away from chemicals (thinner, strong acids
or alkalis). Also, route the hose away from obsta-
cles which it may become dangerously caught on
during operation. Hoses must also be directed
away from sharp edges and areas which may lead
to
damage or abrasion
to
the hose.
Oiler
7
Pneumatic oil
2
T o maintain product SAFETY and RELIABILITY, maintenance and repairs should be performed by Makita
Authorized or Factory Service Centers, always using Makita replacement parts.