Making/Answering Calls Using; The Base Unit - Panasonic KX-TG7892AZ Operating Instructions Manual

Making/Answering Calls Using the Handset
Making a call using the redial list
n When only 1 handset is registered:
1
Lift the handset.
2
MEN REDIAL
3
MbN: Select the desired phone number.
4
Within 1 minute, place the handset on

the base unit.

R Wait until speakerphone is turned
on automatically and the call is
made.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls. For the
operation, please see "Making a call using
the redial list", page 21.
Making a call using the shared
phonebook
There must be at least 2 handsets
registered to the base unit in order for the
shared phonebook feature to be used
during a power failure.
You should leave one handset on the base
unit for supplying the power, and use another
handset for making calls.
For the operation, please see "Finding and
calling from a phonebook entry", page 31.
Answering calls during a power
failure
n When only 1 handset is registered:
1
When the unit rings, keep the handset
on the base unit and press M
MZN.
R Speakerphone is turned on.
2
When you finish talking, press MOFFN.
n When 2 or more handsets are registered:
When the unit rings, use a handset which is
not supplying power to the base unit. For
the operation, please see "Answering calls",
page 22.
R Do not use or lift the handset which is
placed on the base unit during power
back-up mode.
26
Note:
R During a call with the handset placed on the
base unit (power back-up mode), the call
may be disconnected if you touch the
handset. In such case, try to call back.
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
N or