Answering System For Landline; Turning The Answering System On/Off; Greeting Message - Panasonic KX-TG7892AZ Operating Instructions Manual

Answering system for
landline
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting "Greeting only" as the recording
time setting (page 61).
Important:
R Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
R When callers leave messages, the unit
records the day and time of each message.
Make sure the date and time have been set
correctly (page 16).
R When the cellular line only mode is set
(page 19), the answering system cannot be
used and any messages are not received.
R The unit's answering system will not
answer incoming calls on your FaxAbility
number. (for New Zealand)
Memory capacity (including your

greeting message)

The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory becomes full:
– "Messages full" is shown on the
handset and base unit display.
– The ANSWER ON/OFF indicator on the
base unit flashes rapidly if the answering
system is turned on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.

Answering System for Landline

Turning the answering
system on/off
Base unit
Press MANSWER ON/OFFN to turn on/off the
answering system.
Handset
1
To turn on:
MMENUN#327
To turn off:
MMENUN#328
2
MOFFN
Note for base unit and handset:
R When the answering system is turned on,
the ANSWER ON/OFF indicator on the
base unit lights up.
Call screening
Handset / Base unit
While a caller is leaving a message, you can
listen to the call through the unit's speaker.
To adjust the speaker volume, press MDN or
MCN repeatedly.
You can answer the call by pressing M
the handset or MZN on the base unit.
Call screening can be set for each unit. The
default setting is "On".
1
MMENUN#310
2
MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
N on
55