Fan Operation - Hitachi RAS-30CP7 Instruction Manual

FAN OPERATION

You can use the device simply as an air circulator. Use this function to dry the interior of the indoor unit
at the end of summer.
RESET
FAN SPEED (AUTO)
For the cooling operation
RAS/RAC-30CP7 EN3
Black
Press the FUNCTION selector so that the display indicates
1
(FAN).
2
Press the
START Press the
with a beep. Press the button again to stop operation.
STOP
* Note • In the fan operation mode, only display of FAN SPEED
setting will change by pressing FAN SPEED button; the
actual fan speed cannot be changed directly from HI to
LOW mode.
..... When the AUTO fan speed mode is set in the cooling operation:
G When the difference of room temperature and setting temperature is
large, fan starts to run at HI speed.
G After room temperature reaches the preset temperature, the cooling
operation, which changes the fan speed and room temperature to obtain
optimum conditions for natural healthful cooling will be performed.
– 10 –
10
(FAN SPEED) button.*
(START/STOP) button. Fan operation starts
5/3/07, 03:33 PM