Teac HMX2500 User Manual page 10

3. Disc Basic Operation
Once all the connections and settings have been
made, the DVD unit is ready for normal use. Prior
to playback, make sure the following operations
have been carried out.
1. Switch on the TV and select suitable mode.
e.g.: If connected by S-Video, then select
S-Video mode.
2. Switch on this DVD unit.
3. Press the INPUT key on the front panel
or on the remote control and select DISC.
LOADING will be shown on the screen:
POWER
lf there is no disc, NO DISC
the screen:
Step 2: Press the OPEN/CLOSE key, the tray
comes out automatically.
OPEN/CLOSE
Step 3: Place the disc on the tray, press
OPEN/CLOSE to close the tray, the disc type
will be shown on the VFD screen.
3.1 Play disc
Insert a disc into the DVD unit and it will start
playing automatically. Press PLAY/PAUSE to
temporary stop playback,press it again to
resume.
PLAY
Press PAUSE key:
PAUSE
Loading...
will be shown on
No disc
Open
Press NEXT or PREV to jump to next or previous
track/chapter/file.
Press PREV key:
PREV
Press NEXT key:
NEXT
Press F.WARD &B.WARD key to get 2X, 4X ,8X,
16X,32X, normal play circular fast forward &
backward function
F.WARD
B.WARD
Press STOP key once to enable memory stop.
Press PLAY to execute continueous place back.
Press STOP key twice to stop playback.
STOP
NOTE: All images in this manual are
illustrations for reference only.
2X
2X
STOP