PSC QuickScan QS2500 Product Reference Manual page 16

NOTE
12
Option Bar Code
Double Confirm
Multifield Scan
Global Minimum/Maximum Code Length:
length can be set to qualify data entry. The length is defined as the
actual bar code data length to be sent. Labels with length exceeding
these limits will be rejected. Make sure that the minimum-length set-
ting is no greater than the maximum-length setting; otherwise, the
labels of the symbology will not be readable. In particular, you can set
the same value for both minimum and maximum lengths to force
decoding of only fixed-length bar codes. This setting has no effect on
certain symbologies of fixed length.
Set the minimum/maximum length if you have a special demand for
individual bar codes. Include the checksum digits if you want to set
global minimum/maximum code length.
Inverted Image Scan: With this option enabled, the QS2500 will scan
black/white bar codes with a white/black background.
CTS Trigger: This operation enables an external device to control scan-
ning by applying an external trigger signal to the CTS input. When
active, this signal causes scanning to begin as the QS2500's trigger is
depressed.
Visible Scan Field Indicator:
emitted when the trigger is pulled.
Option
0–99
(0 = no double con-
firm)
Disable
Enable
$ $
Global minimum and maximum
This function allows a visible indicator to be
Alphanumeric
Entry
00–09
00*
00*
01
Exit
QS2500