PSC QuickScan QS2500 Product Reference Manual page 15

Product Reference Guide
The QS2500 always keeps a constant reading, and same-
Test only:
label reading is allowed without double confirmation. The fea-
ture can test the performance of the QS2500 for reading speed
and sensitivity.
Standby Duration: A timeout duration of 1 to 99 seconds can be set. It is
effective only when the CCD scanning mode is operated in timeout-off
mode and good-read off mode.
Same Bar Code Delay Time:
only the first bar code will be accepted.
If this option is enabled, the QS2500 will require a sev-
Double Confirm:
eral successful decodings to confirm the bar code data. Larger settings
will make misreads less likely. If a double confirm is set, the multifield
scan function will be disabled.
Multifield Scan: The QS2500 can be read many sets of bar code data on
the same scanning line at the same time, even if they are different kinds
of bar code symbology.
Option Bar Code
Scanning Mode
Standby Duration
Same Bar Code Delay Time
If the bar code has been scanned twice, then
Start Program
Option
Good-read off
Momentary
Alternate
Timeout off
Continue
Test only
0–99 (sec.)
0–99 (10 msec.)
Alphanumeric
Entry
00
01*
02
03
04
05
01–99
10*
01–99
50*
11