Table of Contents
Advertisement
Remote control
Changing the frequency of remote control signal
The accessory remote control has the two choices on signal
frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control
does not function properly, attempt to change the signal frequency.
In order to set the Mode, please keep pressing the combination of
two buttons listed below simultaneously for about 3 seconds.
(1) Set to Mode 1:NORMAL... VOLUME - and RESET buttons
(2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons
Please remember that the REMOTE FREQ. in the SERVICE item of
the OPTION menu (
set to the same mode as the remote control.
Using as a simple PC mouse & keyboard
The accessory remote control works as a simple mouse
and keyboard of the computer, when the projector's USB
TYPE B port and the computer's type A USB port are
connected and MOUSE is selected for the USB TYPE B
item in the OPTION menu (
(1) PAGE UP key: Press PAGE UP button.
(2) PAGE DOWN key: Press PAGE DOWN button.
(3) Mouse left button: Press ENTER button.
(4) Move pointer: Use the cursor buttons ▲, ▼, ◄ and ►.
(5) ESC key: Press ESC button.
(6) Mouse right button: Press RESET button.
WARNING
keyboard function could damage your equipment. While
using this function, please connect this product only to
a computer. Be sure to check your computer's manuals
before connecting this product to the computer.
NOTE
• When the simple mouse & keyboard function of this product does not
work correctly, please check the following.
- When a USB cable connects this projector with a computer having a built-in
pointing device (e.g. track ball) like a laptop PC, open BIOS setup menu, then
select the external mouse and disable the built-in pointing device, because the
built-in pointing device may have priority to this function.
- Windows 95 OSR 2.1 or higher is required for this function. And also this function may
not work depending on the computer's configurations and mouse drivers. This function
can work with the computer which can operate general USB mouse or keyboard.
- You cannot do things like press two buttons at once (for instance, pressing
two buttons at the same time to move the mouse pointer diagonally).
- This function is activated only when the projector is working properly. This function
is not available while the lamp is warming up (the POWER indicator blinks green),
and while adjusting the volume and display, correcting for keystone, zooming in on
the screen, using the BLANK function, or displaying the menu screen.
16
56) of the projector to be controlled should be
51).
►Improper use of the simple mouse &
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
ASPECT
AUTO
SEARCH
MAGNIFY
FREEZE
PAGE
ON
OFF
(2)
KEYSTONE
MY BUTTON
1
POSITION
ENTER
ESC
USB
TYPE B
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
USB port
ASPECT
AUTO
SEARCH
MAGNIFY
FREEZE
PAGE
ON
OFF
KEYSTONE
MY BUTTON
1
(3)
POSITION
ENTER
ESC
(5)
BLANK
VOLUME
UP
DOWN
(1)
MUTE
2
MENU
RESET
(1)
BLANK
VOLUME
UP
(2)
DOWN
MUTE
2
(4)
MENU
RESET
(6)
Advertisement
Table of Contents
