Advertisement
nse Tank
wer rinse arms with
Stainless steel rinse arms with jets
mounted above and
mounted above and below the wares
re easily removable
are easily removable for cleaning.
The final rinse water will cascade back
PM motor with a
to the power rinse, wash and then the
using and impeller
pre-wash tanks.
wer rinse tank is a
ensure complete
d to minimize soil
se Tank
pth
Length
Height
36"
82"
mm)
(914.4 mm)
(2083 mm)
nse Tank
pth
Length
Height
8"
60"
88"
9 mm
(1524 mm)
(2235 mm)
lbs / 284 kg
Final Rinse
Final Rinse
Depth
Length
46"
36"
(1168mm)
(914.4 mm)
Final Rinse
Depth
Length
48"
60"
(1219 mm
(1524 mm)
Weight: 635 lbs / 288 kg
Blower Dryer
A stainless steel tunnel incorporat-
ed into the discharge section of the
machine. The blower dryer keeps the
operating personnel from removing
the wares before it reaches the end of
the unload section. An industrial fan-
type with a squirrel cage driven by
a 0.6 HP direct drive motor dries the
wares as it exits the machine.
*The Blower Dryer is an option
and must be specified at time
of order.
Blower Dryer
Height
Depth
Length
88"
38-1/4"
36
(2235 mm)
(972 mm)
(914.4 mm)
Blower Dryer
Height
Depth
Length
93"
48"
60"
(2362 mm)
(1219 mm
(1524 mm)
Weight: 504 lbs / 229 kg
Unload
A "start/stop" switch is located at
the unload end of the machine for
the operators convenience.
Unload platform is 14 gauge stain-
less steel.
The drive wheel shaft is supported
by two heavy-duty grease-lubri-
cated ball bearings in pillow blocks.
Unload
Height
Depth
Length
36"
38-1/4"
42"
(914.4 mm)
(972 mm)
(1067 mm)
Unload / Load
Shipped with load end
Advertisement
