Installation - Haier HPU-18H03/HBF Operation Manual

Installation Manual of Room Air Conditioner
Accessory parts
Remote controller
Cement nail
Connecting pipe
Drain hose
Wire clip
Insulation pipe
Wall hole cover
Pping hole cover
Dry battery #7
Rubber pad
Non-adhensive tape
signal hose
Optional parts for piping
Necessary Tools for Installation
Drawing for the installation of indoor and outdoor units
Installation of indoor unit
selection of installation place
Place where it is easy to routed rain agepipe
and outdoor piping.
Place away from heat source and with less
direct sunlight.
Place where cool and warm air could be
delivered evently to every corner of the room.
Place near power supply socket. Leave enough
space around the unit.
Place robust not causing vibration,where the
body can be supported sufficiently.
Installation of outdoor unit
selection of installation place
Place strong enough to support the unitand will
not cause vibration and noise.
Place where discharged wind and noise doesn,t
causea nuisance to the neighbors.
Place where is less affected by rain or direct sunlight
and is sufficiently ventilated,or to install a shield.
Place with enough space for smooth air flow.
Arrangement of piping directions
LEFT
Read this manual before installation
Explain sufficiently the operating means to the user
according to this manual.
BACK
RIGHT