Preparation - Kenwood Nexedge NX-200G Instruction Manual

INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK
1 Match the guides of the battery pack with the grooves on
the upper rear of the transceiver, then fi rmly press the
battery pack in place.
2 Lock the safety catch to prevent accidentally releasing the
battery pack.
3 To remove the battery pack, lift the safety catch, press the
release latch, then pull the battery pack away from the
transceiver.
1
Note:
◆ For battery pack charging procedures and usage, refer to the
battery charger Instruction Manual.
◆ Before charging a battery pack that is attached to the
transceiver, ensure that the safety catch is fi rmly closed.
◆ While operating the transceiver using a Li-ion battery pack in
areas with an ambient temperature of –10°C/ +14°F and lower,
operating time may be shortened.
◆ Install the battery pack after cleaning the battery pack contacts
and the transceiver terminals.
2

PREPARATION

Release latch
2
Safety catch
3