Kenwood Nexedge NX-200G Instruction Manual page 41

BATTERY SAVER
The Battery Saver can be activated only on Conventional
channels. This function decreases the amount of power used
when a signal is not being received and no operations are
being performed.
KEY LOCK
Press the key programmed as [Key Lock] to lock and unlock
the transceiver keys.
• The following keys still function when Key Lock is activated:
Emergency, Backlight, Monitor, Monitor Momentary, Squelch Off,
Squelch Off Momentary, Function, Key Lock, PTT
LOW BATTERY WARNING
Your dealer can set an alert tone to sound and the LED
indicator to blink red when the battery power is low. The
battery power icon displays the battery power remaining, as
described in the table below. When the battery power is very
low, recharge or replace the battery pack.
High
SIGNAL STRENGTH INDICATOR
The signal strength indicator displays the strength of received
calls. No icon appears when no signal is available.
Strong
Flashes when out of range (NXDN Trunking only).
Suffi cient
Suffi cient
Low
Weak
Very low
Very weak
31