Rangemaster Nexus 110 Dual Fuel User's Manual & Installation Instructions page 17

Re-set the Minute Minder
To re-set the minute minder, first select the minute minder
program by pressing the mode [M] button. Then press the
[+] and [-] buttons simultaneously.
•
The 'cook period', which is the length of time you
want the oven to cook for (dur).
•
The 'stop time', which is the time of day you want the
oven to stop cooking (End).
To Stop the left-hand Oven at a Specific Time of Day
1.
Press the mode [M] button 3 times, until the display
flashes (End) (Fig. 2.32).
2.
Select the 'stop time' using the [+] or [-] buttons. The
display will show the current time along with the AUTO
and Cooking symbols (Fig. 2.33).
3.
When the 'stop time' is reached an alarm will sound and
the oven will stop working. The word AUTO will flash on
the display (Fig. 2.34).
4.
Press any button to stop the alarm and return to
manual cooking. If the alarm is not stopped, it will stop
automatically after 7 minutes.
To Start and Then Stop the Left-hand Oven
Set the left-hand oven to automatically start and stop using a
combination of the 'cook period' and 'stop time'.
You cannot set a start time directly – this is set
automatically by a combination of the 'cook period' and
'stop time'.
1.
Press the mode [M] button until the display flashes (dur)
(Fig. 2.35). Then set the 'cook period' using the [+] or [-]
buttons.
2.
Press the mode [M] button until the display flashes (End)
(Fig. 2.36). Then set the 'stop time' using the [+] or [-]
buttons. Current time will be displayed along with the
word 'AUTO' (Fig. 2.37).
3.
Set the oven to the required cooking temperature.
4.
During the 'cook period' the cook symbol [ ] is
illuminated in the display.
5.
When cooking is finished an alarm will sound. Press any
button to stop the alarm and return to manual cooking.
If the alarm is not stopped, it will stop automatically
after 7 minutes.
AUTO is Showing, But You Want to Revert to Manual
Cooking
You can cancel any automatic settings by pressing the
[+] and [-] buttons simultaneously.
Changing the tone of the alarm
It is possible to change the alarm tone.
1.
Press the the [+] and [-] buttons simultaneously, then
the mode [M] button. The display will show (ton1,2 or 3)
(Fig. 2.38).
2.
To select the tone press the [-] button until desired tone
is reached (Fig. 2.39).
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
13
Fig. 2.35
Fig. 2.36
Fig. 2.37
Fig. 2.38
Fig. 2.39