Related Manuals for Jackson 200 3 10 06401-003-12-94
Summary of Contents for Jackson 200 3 10 06401-003-12-94
- Page 1 Rack Conveyor Dishmachine Maintenance Instructions Heater Replacement 07610-003-12-01 A October 14, 2005...
-
Page 2: Tools Required
Occasionally, some of these components may need replacing to maintain opti- mum performance. Jackson offers all of the repair parts necessary for per- forming this task. The instructions provided here are for maintenance per- sonnel only. - Page 3 Removing silicone from thermostat well 7. With the thermostat probe out of the way, use the 1/2” socket and ratchet to remove the nuts holding the heater to the tub. Remove all nuts and lockwashers. Removing the nuts and lockwashers 8.
- Page 4 www.jacksonmsc.com Putting the thermostat probe in the heater well 14. Apply silicone to seal the well and hold the thermostat probe in place. Applying silicone to the heater well 15. Reattach the incoming power lines to the heater, ensuring that you wire the heater correctly for either single or three phase oper- ation.
- Page 5 Before begin- ning this or any other maintenance evolution on a unit under war- ranty, you should contact a certified Jackson technician or Jackson Technical Service. You can find a list of qualified service agencies in the back of you unit’s installation manual.