How To Lock In Position; How To Chop - Black & Decker FP1600B Use And Care Book Manual

HOW tO LOCk tHe pROCessOR WORkBOWL IN pOsItION
IMpORtaNt: press the OFF/puLse button before placing the workbowl on the
base of the processor.
d
e
HOW tO CHOp IN tHe pROCessING WORkBOWL
The chopping blade is used to coarsely or finely chop, mince, mix, and puree
foods to a smooth consistency.
F
5. Place the food pusher in place.
Important: Never use your fingers to direct food through the feed chute.
6. Select your desired speed (PUlSe or oN).
Note: Process foods for no more than a few seconds at a time. Pulsing produces
excellent results and offers greater control.
Important: Make sure the chopping blade has completely stopped spinning
before removing cover from processing bowl.
7. Press the oFF/PUlSe button and allow the chopping blade to stop revolving
before removing cover. Twist cover toward
Important: unlock lid first before removing workbowl.
8. Unlock workbowl by turning it counterclockwise and lift off base.
Note: Remove workbowl from appliance before removing the chopping blade to
prevent food from leaking through the center opening of the workbowl.
9. Carefully remove the chopping blade.
6
1. Attach center post to workbowl. Place the workbowl on
the base with handle turned to the right of the locking
mechanism (d) over the unlock symbol
2. Hold handle and rotate workbowl clockwise toward the
lock symbol
Note: Be sure to lock the workbowl in place before attaching
the chopping blade or the slicing and shredding disk and the
cover.
1. lock workbowl into position (see Illustrations d and e).
2. Hold chopping blade by center shaft and insert onto center
post (F).
Caution: the chopping blade is very sharp. use caution
when handling and storing.
3. Place food in workbowl.
4. Place cover on workbowl and lock into place by rotating
clockwise (see Illustration J).
until it clicks firmly into place (e).
(counterclockwise) to remove.
.