PWB ASSEMBLY (MAIN)
THE SETTING WATER TEMPERATURE
WASH HEATER TROUBLE
When checking the voltage between
(Main) during cotton 95°C washing ,Is
the voltage 220 - 240V ~ ?
After power off,is the resistance of wire
(RED-YELLOW) connectors between
10Ω to 30Ω?
After power off and the heater terminal
is disconnected, is the resistance
10 to 30Ω?
HEATING CONTINUOUSLY ABOVE
When disconnect the connector (1) on
the PWB assembly (Main) is the
resistance of the Red connectors [
(SBL)] between 2.5kΩ to
When checking thermistor on the tub,
is the thermistor loosened above 2mm
from the rubber?
) the PWB assembly
1 2 3
Replace the PWB
Replace the thermistor
Push the thermistor
tightly to the rubber.